Equities Screening · Technical Momentum

Minervini Volatility Contraction Pattern (VCP) & Trend Template Guide

A quantitative masterclass in Mark Minervini's Specific Entry Point Analysis (SEPA): the 8-point Stage 2 Trend Template, progressive wave contractions (T1 to T4), Volume Dry-Up (VDU), and asymmetric risk-to-reward pivot breakouts.

✍️ By Ross Kan · Makecade Research📅 Published: September 28, 2026 · Updated: November 2026⏱️ 14 min read🏛️ Sources: SEPA methodology & 8-point Stage 2 Trend Template

1. What Are the 8 Criteria in Minervini's Stage 2 Trend Template?

Mark Minervini's 8-point Trend Template filters for equities in a confirmed Stage 2 institutional markup before pattern screening begins. A stock must trade above its 50-, 150-, and rising 200-day simple moving averages, stand at least 30% above its 52-week low, sit within 25% of its 52-week high, and post a Relative Strength rating of 70 or higher.

Criterion #Technical IndicatorRequired Stage 2 Threshold
Criterion 1Price vs 150 & 200 SMACurrent stock price is strictly above both the 150-day and 200-day moving averages.
Criterion 2150 SMA vs 200 SMAThe 150-day simple moving average is strictly above the 200-day simple moving average.
Criterion 3200 SMA DirectionThe 200-day simple moving average is trending upwards for at least 1 month (preferably 4–5 months).
Criterion 450 SMA AlignmentThe 50-day moving average is above both the 150-day and 200-day moving averages.
Criterion 5Off 52-Week LowCurrent price is at least 30% above its 52-week low (top leaders are often 100%+ above).
Criterion 6Near 52-Week HighCurrent price is within 25% of its 52-week high (closer is better, demonstrating strength).
Criterion 7Relative Strength (RS)Relative Strength rating is 70 or higher, indicating the stock outperforms 70% of the market.
Criterion 850-Day Price ActionPrice is consolidating above the rising 50-day moving average, showing constructive institutional support.

2. How Does a Volatility Contraction Pattern (VCP) Form?

A Volatility Contraction Pattern forms over 2 to 60 weeks as institutional buyers steadily absorb remaining overhead supply from trapped sellers. Each successive correction wave (T1 through T4) shrinks to roughly half the percentage depth of the prior pullback—such as −24% to −12% to −6% to −2.5%—narrowing toward a tight pivot point.

Progressive Contraction Waves (T-Steps)

T1 (-24%) → T2 (-12%) → T3 (-6%) → T4 (-2.5%) ⇒ Pivot Breakout

Each contraction wave (referred to as a T for contraction) is approximately half the depth of the preceding wave. A pattern can form with 2, 3, or 4 contractions (2T, 3T, or 4T) spanning 2 to 60 weeks.

3. Volume Dry-Up (VDU) & Supply Exhaustion

The most critical confirming indicator inside a VCP is volume behavior. While price is consolidating through the final contraction (T3 or T4), volume must contract dramatically to signal seller exhaustion:

  • Volume Dry-Up (VDU): Daily volume should shrink to 40%–60% below the 50-day average volume, with several days showing the lowest volume recorded in months.
  • Tight Closes: Daily price spreads (high to low) should become extremely narrow, often moving less than 1%–2% throughout the session.
  • The Supply Vacuum: If there is little volume on days when price dips, it confirms that supply has dried up. Because supply is virtually gone, even a small influx of institutional buying demand will propel the stock sharply higher.

4. The Pivot Point & Breakout Execution

The pivot point is the line of least resistance where supply has dried up. It is typically defined as the high of the most recent, tightest pullback within the base:

  • Entry Trigger: Buy when price crosses the pivot point intraday. Do not wait for market close.
  • Volume Confirmation: On the breakout day, trading volume should expand by at least +50% to +100% (or 2× to 3×) above the 50-day average volume within the first two hours of trading.
  • The Cheat / Low Cheat: An advanced entry technique where the trader buys early inside the handle or lower consolidation of the base as soon as volume dries up, lowering average entry price.

5. Strict Risk Management Rules

The primary advantage of SEPA is downside control:

  1. Maximum Stop-Loss: Never risk more than 7% to 8% under any circumstances. In high-quality VCP setups, stops can be placed 3% to 4% below the pivot.
  2. Asymmetric Reward/Risk: Target a minimum 2:1 or 3:1 reward-to-risk ratio. If risking 4%, target 8% to 12% on partial profit-taking.
  3. Breakeven Trailing: Once a breakout gains 3× the initial risk, advance the stop loss to breakeven to eliminate capital risk.

6. Interactive Stock Screener Terminal

Scan thousands of equities daily for Trend Template alignment, progressive contraction setups, and Volume Dry-Up signals on the Makecade VCP Stock Analysis Terminal, or scan 61 classical technical setups on the Makecade Technical Analysis Platform.

Frequently Asked Questions

What is the difference between a Cup-with-Handle and a VCP?

William O'Neil's classic Cup-with-Handle pattern is a specific 2-contraction VCP (T1 cup pullback, T2 handle pullback). The VCP is a broader, more generalized framework that includes 3T, 4T, flat bases, and ascending bases.

What causes a VCP breakout to fail?

The two primary causes of VCP failure are: (1) weak general market conditions (trading breakouts during market correction/bear regimes), and (2) overhead supply was not truly absorbed (breakout occurs on weak volume or wide daily spreads).

Can VCP patterns form on ETFs or crypto?

While VCP principles apply to any liquid asset, the pattern performs best on high-growth individual equities with strong earnings and sales catalysts, where supply is finite and institutional accumulation creates sharp price appreciation.